Copper CNC Machining Aluminum Parts For Lock Cylinder Anti Corrosion

Precision Copper CNC Machining Parts For Lock Cylinder Parts With ISO 9001

Quick Detail

Description

This CNC Machining Part is based aluminum profile 6061 material to processing, first of all, we check the raw material dimension is fine or not, the second is that according to the drawing, use the CNC Gear shovel machine to do the dimension, the third is that accroding to the drawing, uthe forth is that use the CNC to do exact dimension, the fifth is do anodizing , the last step is riveting, and then inspection/packing. First inspection and patrol inspection are done in processing .

Note

What should we pay attention to when machining CNC precision parts?

1. The self-check should be carried out in time after the rough machining is completed, so that the data with errors can be adjusted in time. The content of the self-inspection is mainly the position and size of the processing part.

• Whether the workpiece is loose;
• Whether the workpiece is correctly centered;
• Whether the dimension from the machining position of CNC hardware parts to the reference edge (reference point) meets the requirements of the drawing;
• The size of the position between the CNC machining parts. After checking the position and size, the rough-cut shape ruler should be measured (except for arcs).

2. Finish machining only after rough machining self-inspection. After finishing processing, workers should conduct self-inspection on the shape and size of the processed parts: check the basic length and width dimensions of the processed parts on the vertical surface; measure the basic point size marked on the drawing for the processed parts of the inclined surface.

3. After the worker completes the self-inspection of the workpiece and confirms that it is in compliance with the drawings and process requirements, the workpiece can be removed and sent to the inspector for special inspection.

We can offer CNC machining partd for custom design.